Motorola AT Commands G24-L Información técnica Pagina 306

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 522
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 305
Modem Configuration and Profile
3-230 AT Commands Reference Manual January 31, 2007
S, Bit Map Registers
This command reads/writes values of the S-registers. The G24 supports this command for various
S values, according to official specifications (ITU-I, ETSI, or manufacturer specific).
Command Type Syntax Response/Action Remarks
Set
ATSn=<value OK
or:
+CME ERROR: <err>
The Set command is allowed for
read/write S-registers, and not allowed
for read-only S-registers.
Read
ATSn? <current value of
S-register n>
or:
+CME ERROR: <err>
Test The Test command for Sn is not
defined by ITU, and therefore is not
supported by the G24. The G24 returns
an error.
Vista de pagina 305
1 2 ... 301 302 303 304 305 306 307 308 309 310 311 ... 521 522

Comentarios a estos manuales

Sin comentarios