Motorola MTM5400 Guía de usuario Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 176
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
76
Emergency Operation
Silent Emergency and TMO/DMO Mode
As the Silent Emergency is only available in TMO, terminal
will change the mode from DMO to TMO. When the user is in
a private or group call, Silent Emergency waits until any of
the calls is ended to change the mode and enter the Silent
Emergency Mode.
Power off in Silent Emergency mode
If user initiates the power off while in Silent Emergency mode
the terminal goes to pseudo power off state. In this state
audio and visible indications are turned off but the terminal is
still on in the Silent Emergency mode as before.
Power on in pseudo power off
User presses the Emergencey button, the terminal indicates
power on but it is still in Silent Emergency mode.
Silent Emergency mode and PIN protect
The terminal enters the Silent Emergency mode while in the
PIN protected state, it asks the user for the unlocking code.
When the terminal exits the Silent Emergency mode, it is still
in the PIN protected state.
Emergency in DMO
Overview
You can initiate an Emergency Group Call to a group.
You can receive an Emergency Group Call:
From the selected talkgroup
From other users within talkback range (if configured by
your Service Provider). This is called an InterMNI call.
If the Silent Emergency mode enters after the call the only
change on the display is the Private/Group notice which
disappears.
If the terminal exits the Silent Emergency mode after powering
off in it, the terminal shuts down without any indication.
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 175 176

Comentarios a estos manuales

Sin comentarios