Motorola MC9190-G Manual de usuario descargar pdf (Pagina 46)

Trouble Shooting

Mobile Computer MC 9190

-NI

Type B7-A28.-…………

Page 34 of 50

Technical data subject to change without notice.

Issue: Revision 2 / August 2012

5 Commissioning

The operator of an electrical system in a hazardous environment must keep the operating

equipment in an orderly condition, operate it correctly, monitor it and do the required

maintenance and repairs.

Before commissioning the MC 9190

-NI, check that all components and documents are

there.

The following conditions must be met before the device may be commissioned:

− Check the MC 9190

-NI for damage to display, scanner window and the enclosure.

− Check that the used battery is a certified one.

− Make sure that the battery is changed before insert in the MC 9190

-NI.

− Check when use a screen protector that it is a certificated one.

− Strap, attached to the MC 9190

-NI

− Stylus, in the stylus silo

− Manual inside of the box

5.1.1 Display

Note

Use only the stylus included with the device to operate t

he touch screen. A biro, for

example, could scratch or even destroy the touch screen.

The Mobile Computer must be treated carefully as the sensitive touch screen has a

glass pane which can break if subjected to a lot of strain or let fall. The guarantee will

be void if it is apparent that the damage to the touch screen is due to inappropriate use.

MC 9190

-NI with protective film

Take off the protective film

The display as supplied from the factory is covered with a protective film. Remove the

protective film before using the device.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 67 68

Sin comentarios

Motorola MC9190-G Manual de usuario Pagina 46