Motorola MS3204 Especificaciones descargar pdf (Pagina 124)

10 - 18 Symbol MiniScan MSXX04 Series Integration Guide

Timeout Between Decodes

Timeout Between Decodes, Same Symbol

Parameter # 89h

When in Continuous triggering mode, this parameter sets the minimum duration of not decoding data before the

scanner decodes a second bar code identical to one just decoded. This reduces the risk of accidently scanning the

same symbol twice. It is programmable in 0.1 second increments from 0.0 to 9.9 seconds. The recommended

interval is 0.6 seconds.

Timeout Between Decodes, Different Symbol

Parameter # 90h

This option sets the minimum duration of not decoding data before the scanner decodes a second (different) bar

code. This is used in continuous-on mode to prevent the beeper from beeping when a different symbol appears in

the scanner’s field of view before the timeout period between decodes expires. This is programmable in 0.1 second

increments from 0.0 to 9.9 seconds. The recommended value is 0.0 seconds.

Select the timeouts between decodes for the same or different symbols.

1. Scan the option bar code you wish to set.

2. Scan two numeric bar codes beginning on page 10-111 which correspond to the desired interval, in 0.1 second

increments.

To change the selection or to cancel an incorrect entry, scan the Cancel bar code on page 10-113.

Timeout Between Decodes -

Same Symbol

Timeout Between Decodes -

Different Symbols

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 259 260

Sin comentarios

Motorola MS3204 Especificaciones Pagina 124