Motorola DCX3501-M Guía de usuario descargar pdf (Pagina 20)

Connecting Your DCX Set-top B

High-Definition All-Digital Dual Tuner DVR Set-top DCX3501–M • User Guide

365-095-16095-x.3

HDMI or IEEE-1394 — HDTV and SDTV

HDMI and IEEE-1394 offer higher quality HD video than component video.

• If your TV has an HDMI input, this is for both audio and video. Connect a Standard

HDMI cable to the TV and to the HDMI connector on your DCX set-top.

• HDMI and IEEE-1394 outputs provide video and audio, so no separate audio

connections are required if you plan to use your TV’s speakers as the primary audio

source.

• On-screen graphics will not be displayed when you are using the IEEE-1394

connection on the rear panel of the DCX set-top. Refer to Section 6 for more

information.

• If your TV has a DVI input, connect a HDMI-to-DVI adapter or cable to the HDMI out

connector on the DCX set-top and the DVI HDTV connector on your TV.

Note: DVI does not provide audio. A separate audio connection must be made.

Component video (YPbPr) — HDTV and SDTV

The YPbPr connectors on your DCX set-top provide HDTV and SDTV component video.

Note: Component video does not provide audio. A separate audio connection must be

made.

S-Video — SDTV

If a component video input is not available on your TV, use the S-Video connection.

Note: S-Video does not provide audio. A separate audio connection must be made.

Composite Video — SDTV

If an S-Video input is not available on your TV, use the composite video (video)

connection.

Note: Composite video does not provide audio. A separate audio connection must be

made.

RF Output — SDTV

If no other input is available on your TV, the RF Output of the DCX3501-M set-top can be

connected to the Antenna or Cable Input on your TV. The RF Output carries both video

and audio. Set your TV to channel 3 or 4.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 57 58

Sin comentarios

Motorola DCX3501-M Guía de usuario Pagina 20