Motorola MC9090-G Guía de usuario descargar pdf (Pagina 22)

1 - 8 MC9090-G RFID User Guide Supplement

Starting the Mobile Computer

Press the red Power button to turn on the mobile computer. If the mobile computer does not power on, perform a

cold boot. See the MC9090-G RFID Integrator Guide Supplement, p/n 72-89963-xx for cold boot procedures.

When the mobile computer is powered on for the first time, it initializes its system. The Symbol splash screen

(Figure 1-4) appears for a short period of time.

Figure 1-4

Symbol Splash Window

Calibrating the Screen

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:

1. Using the stylus carefully press and briefly hold the tip of stylus on the center of each target that appears on the

screen.

2. Repeat as the target moves around the screen or press ESC to cancel.

NOTE When a battery is fully inserted in a mobile computer for the first time, upon the first power up, the device

boots and powers on automatically.

NOTE To re-calibrate the screen at anytime, press the blue FUNC and ESC keys on the mobile computer to

launch the calibration screen application.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 77 78

Sin comentarios

Motorola MC9090-G Guía de usuario Pagina 22