Motorola TC55 Guía de usuario descargar pdf (Pagina 114)

Configuring a Wi-Fi Network

Procedure:

Touch .

Touch Wi-Fi.

4 Slide the switch to the ON position.

5 The TC55 searches for WLANs in the area and lists them on the screen.

6 Scroll through the list and select the desired WLAN network.

7 Touch the desired network. If the network security is Open, the TC55 automatically connects to the network. For

all other network security a dialog box appears.

Figure 95: WLAN Network Security Dialog Boxes

Note: By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring

for a Proxy Server on page 115 for setting connection to a proxy server and see Configuring the Device

to Use a Static IP Address on page 116 for setting the device to use a static IP address.

8 If the network security is WEP or WPA/WPA2 PSK, enter the required password and then touch Connect.

9 If the network security is 802.1x EAP, enter the information below and then touch Connect:

• Touch the EAP method drop-down list and select PEAP, TLS or TTLS.

• Touch the Phase 2 authentication drop-down list and select an authentication method.

• If required, touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are

installed using the Security settings.

• If required, touch User certificate and select a user certificate. Note: User certificates are installed using the

Location & security settings.

• If required, in the Identity text box, enter the username credentials.

• If desired, in the Anonymous identity text box, enter an anonymous identity username.

• If required, in the Password text box, enter the password for then given identity.

Touch .

114 | Wireless

September 2013 | MN000015A01

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 159 160

Sin comentarios

Motorola TC55 Guía de usuario Pagina 114