Motorola Canopy Backhaul Module Guía de usuario descargar pdf (Pagina 55)

45 Mbps Backhaul User Guide

Issue 3, December 2004 Page 54 of 113

Figure 25 Software Upgrade Complete

When the software image has been written to non-volatile memory Figure 25 will be displayed showing the

status of the software upload.

Reboot the unit by clicking the Reboot Unit button. This will reboot the unit within 30 seconds, during this time

you will not be able to communicate with the unit. The unit is now fully functional.

If this screen is not displayed after 60 seconds this could indicate a problem with the memory update process.

The user should now power cycle the unit to start using the new software image. The unit’s boot software will

automatically determine the health of the newly uploaded software image. If any problems were encountered

the boot code will revert to a protected fixed software image

After the power cycle the user should check that the required software image is loaded and running by re-

entering the Upgrade page where the software bank status will be displayed.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 112 113

Sin comentarios

Motorola Canopy Backhaul Module Guía de usuario Pagina 55