Motorola Netopia 3300 Guía de usuario descargar pdf (Pagina 251)

251

CONFIG Commands

set ip static-routes destination-network

net_address

gateway-address

gate_address

Speciﬁes the IP address of the Gateway for the static route. The default Gateway must be

located on a network connected to the Netopia Gateway conﬁgured interface.

set ip static-routes destination-network

net_address

metric

integer

Speciﬁes the metric (hop count) for the static route. The default metric is 1. Enter a num-

ber from 1 to 15 for the integer argument to indicate the number of routers (actual or best

guess) a packet must traverse to reach the remote network.

You can enter a metric of 1 to indicate either:

• The remote network is one router away and the static route is the best way to reach it;

• The remote network is more than one router away but the static route should not be

replaced by a dynamic route, even if the dynamic route is more efﬁcient.

set ip static-routes destination-network

net_address

rip-advertise [ SplitHorizon | Always | Never ]

Speciﬁes whether the gateway should use Routing Information Protocol (RIP) broadcasts to

advertise to other routers on your network and which mode to use. The default is SplitHo-

rizon.

delete ip static-routes destination-network

net_address

Deletes a static route. Deleting a static route removes all information associated with that

route.

IPMaps Settings

set ip-maps name <

name

> internal-ip <

ip address

Speciﬁes the name and static ip address of the LAN device to be mapped.

1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 326 327

Sin comentarios

Motorola Netopia 3300 Guía de usuario Pagina 251