Motorola T2-2500 Manual de instrucciones descargar pdf (Pagina 2)

INSTALL M2 ETHERNET WALLPLATE

1.Loosen existing screws by approximately 6mm

Attach bracket using the keyhole slots

Tighten screws until the brack is firnly attached

2.Connect 150mm RJ11 cable between vertical RJ11 on

m2 WallPlate and existing RJ11 jack

3.Align cover with the bracket, using a slight angle to start the

bottom hook. Apply firm pressure to snap the cover into place.

4.Install two set screws (supplied) in the pre-drilled holes

1.Loosen existing screws by approximately 6mm

Attach bracket using the keyhole slots

Tighten screws until the brack is firnly attached

2.Connect 50mm RJ11 cable between vertical RJ11 on

MC-802 WallPlate and existing RJ11 jack

3.Attach WallPlate to bracket using two 6/32 thread-forming

screws (supplied)

www.motorola.com

570343-001-00 rev A

MOTOROLA and the stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners.

6/32 thread forming screws

INSTALL MC-802 WIRELESS WALLPLATE

1 2

INSTALL M2 ETHERNET WALLPLATE 2

Comentarios a estos manuales

Sin comentarios

Motorola T2-2500 Manual de instrucciones Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Motorola T2-2500