Motorola AP-51XX Guía de instalación descargar pdf (Pagina 22)

AP-5131 Access Point: Installation Guide

3. Attach the Radio 1 and/or Radio 2 antennas to their correct connectors.

For information on the antennas available to the AP-5131, see

“

AP-5131 Antenna Options” on page 6.

4. Cable the AP-5131 using either the Power Injector solution or an approved line cord and

power supply.

For Motorola Power Injector installations:

a. Connect a RJ-45 Ethernet cable between the network data supply (host) and the Power

Injector Data In connector.

b. Connect a RJ-45 Ethernet cable between the Power Injector Data & Power Out

connector and the AP-5131 LAN port.

c. Ensure the cable length from the Ethernet source (host) to the Power Injector and

AP-5131 does not exceed 100 meters (333 ft). The Power Injector has no On/Off power

switch. The Power Injector receives power as soon as AC power is applied. For more

information, see “

Power Injector System” on page 8.

For standard power adapter (non Power Injector) and line cord installations:

a. Connect a RJ-45 Ethernet cable between the network data supply (host) and the AP-5131

LAN port.

b. Verify the power adapter is correctly rated according the country of operation.

c. Connect the power supply line cord to the power adapter.

d. Attach the power adapter cable into the power connector on the AP-5131.

e. Attach the power supply line cord to a power supply.

5. Verify the behavior of the AP-5131 LEDs. For more information, see “

LED Indicators” on

page 21.

6. Align the bottom of the ceiling T-bar with the back of the AP-5131.

7. Orient the AP-5131 chassis by its length and the length of the ceiling T-bar.

CAUTION Ensure you are placing the antennas on the correct connectors

(depending on your single or dual-radio model and frequency used) to

ensure the successful operation of the AP-5131.

CAUTION Do not actually connect to the power source until the cabling portion

of the installation is complete.

72-70931_01.book Page 16 Monday, May 4, 2009 8:10 AM

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 49 50

Sin comentarios

Motorola AP-51XX Guía de instalación Pagina 22