Motorola AP-650 Series Guía de instalación descargar pdf (Pagina 6)

6 AP650 Access Point

1.5 Features

• One RJ-45 connector

• LED indicators

• Safety wire tie point

• Slots for wall mounting

• Clips for mounting on a suspended ceiling T-bar

• Lock port for Kensington® style Security Lock

The AP650 access point has one RJ-45 connector supporting an 10/100/1000 Ethernet port and requires

802.3af-compliant power from an external source.

The AP650 Access Point comes in both single and dual radio versions both supporting 802.11a/b/g/n.

The Access Point contains runtime firmware which enables the unit to boot after either a power up or a watchdog

reset. The runtime firmware on the Access Point and the firmware downloaded from the controller can be updated

via the Ethernet interface from the controller.

NOTE When operating in a Gigabit Ethernet environment CAT-5e or CAT-6 cable

is required for Gigabit operation.

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Sin comentarios

Motorola AP-650 Series Guía de instalación Pagina 6