Motorola AP-7131N-FGR Guía de instalación

INSTALLATION AP-7131N-FGR Access PointInstallation Guide

AP-7131N-FGR Access Point: Installation Guide 4Contact the Motorola Support Center to report missing or improperly functioning items. 2.4 Access P

Hardware Installation5To maximize the access point’s radio coverage area, Motorola recommends conducting a site survey to define and document radio in

AP-7131N-FGR Access Point: Installation Guide 62.4.2 Power Injector SystemThe AP-7131N-FGR can receive power via an Ethernet cable connected to th

Hardware Installation7The Power Injector can be installed free standing, on an even horizontal surface or wall mounted using the power injector’s wall

AP-7131N-FGR Access Point: Installation Guide 81. Connect the Power Injector to an AC outlet (110VAC to 220VAC).2. Connect an RJ-45 Ethernet cable be

Hardware Installation9

AP-7131N-FGR Access Point: Installation Guide 10To mount the access point on a wall using the provided template: 1. Xerox copy the template (on the p

Hardware Installation1111. Cable the access point using either the Power Injector solution or an approved line cord and power supply.For Motorola Powe

AP-7131N-FGR Access Point: Installation Guide 122.5.2 Suspended Ceiling T-Bar InstallationsA suspended ceiling mount requires holding the access p

Hardware Installation13a. Connect a RJ-45 Ethernet cable between the network data supply (host) and the access point’s GE1/POE or GE2 port.b. Verify t

AP-7131N-FGR Access Point: Installation Guide 1411. The access point is ready to configure. For information on basic access point device configuratio

Hardware Installation15 The mounting hardware required to install the access point above a ceiling consists of:• Light pipe• Badge for light pipe• Dec

AP-7131N-FGR Access Point: Installation Guide 165. Create a light pipe path hole in the target position on the ceiling tile.6. Use a drill to make a

Hardware Installation1713. Align the ceiling tile into its former ceiling space.14. Cable the access point using either the Power Injector solution or

AP-7131N-FGR Access Point: Installation Guide 182.6 LED IndicatorsAn AP-7131N-FGR access point has six LEDs on the top of the access point housing

Hardware Installation192.6.1 Dual Radio (2.4/5 Ghz) LEDsA dual radio (2.4/5 Ghz) AP-7131N-FGR access point has the following unique LED behavior: L

AP-7131N-FGR Access Point: Installation Guide 202.6.2 Rear AP-7131N-FGR LEDThe LED on the rear (bottom) of the access point is optionally viewed u

Basic Configuration214. Enter the IP address of the AP-7131N-FGR within Internet Explorer. Select the Continue to this Website (not recommended) optio

AP-7131N-FGR Access Point: Installation Guide 223.2 Configuring the Access PointFor the basic setup described in this guide, the Java-based Web U

Basic Configuration232. Log in using admin as the default User ID and motorola as the default password. If the default login is successful, the Change

1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1 Document Conventions . . . . . . . . . . .

AP-7131N-FGR Access Point: Installation Guide 243.3 Resetting the Access Point’s PasswordThe access point has a means of restoring its password to

Basic Configuration252. Select the System Configuration tab to define the access point’s system, WIPS server and radio configuration. 3. Refer to the

AP-7131N-FGR Access Point: Installation Guide 26correct country is central to legally operating the access point. Each country has its own regulatory

Basic Configuration275. Select the Quick Setup screen’s Network Configuration tab to define a minimum set of WAN or LAN configuration values. The WAN

AP-7131N-FGR Access Point: Installation Guide 28b. Select the This Interface is a DHCP Client checkbox to enable DHCP for the access point WAN connec

Basic Configuration29a. Select the Enable LAN Interface checkbox to forward data traffic over the access point LAN connection. The LAN connection is e

AP-7131N-FGR Access Point: Installation Guide 307. Select the WLAN #1 tab (WLANs 1 - 4 are available within the Quick Setup screen) to define its ESS

Basic Configuration3110. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings displayed on the Quick Setup sc

AP-7131N-FGR Access Point: Installation Guide 323. Select the WPA2/CCMP (802.11i) option.4. Configure the Key Rotation Settings as required to set Br

Basic Configuration335. Configure the Key Settings as needed to set a 256-bit key. Default (hexadecimal) 256-bit keys for WP2A/CCMP include:1011121314

4.3 Radio Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395.0 Regulatory Compliance . . . . . . . . . . . . .

AP-7131N-FGR Access Point: Installation Guide 341. Select Network Configuration -> WAN -> VPN from the access point menu tree.2. Select the Add

Basic Configuration354. Select the Auto (IKE) Key Exchange checkbox and the IKE Settings button.IKE provides an automatic means of negotiation and aut

AP-7131N-FGR Access Point: Installation Guide 363.4.4 Testing Mobile Unit ConnectivityVerify the access point’s link with an MU by sending Wireles

Basic Configuration373.5 Where to Go From Here?Once basic connectivity has been verified, the access point can be fully configured to meet the need

AP-7131N-FGR Access Point: Installation Guide 384 Specifications4.1 Physical CharacteristicsAn AP-7131N-FGR access point has the following physica

Specifications394.3 Radio CharacteristicsAn AP-7131N-FGR has the following radio characteristics: Operating Channels All channels from 4920 MHz to

AP-7131N-FGR Access Point: Installation Guide 405 Regulatory ComplianceThis device is approved under the Symbol Technologies brand; Symbol Technologi

Regulatory Compliance41RF Exposure GuidelinesSafety InformationThe device complies with Internationally recognized standards covering human exposure t

AP-7131N-FGR Access Point: Installation Guide 42Radio Frequency Interference Requirements—FCCThis equipment has been tested and found to comply with

Regulatory Compliance43CE Marking and European Economic Area (EEA)The use of 2.4GHz RLAN’s, for use through the EEA, have the following restrictions:•

vMOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Symbol is a registered trademark of Symbol Technologies, Inc

AP-7131N-FGR Access Point: Installation Guide 44For more information consult the website www.anatel.gov.brDeclarações Regulamentares para AP7131N - B

Regulatory Compliance45Wireless device operate in the frequency band of 5.25-5.35 GHz, limited for Indoor use only.在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用

AP-7131N-FGR Access Point: Installation Guide 466 Waste Electrical and Electronic Equipment (WEEE)English: For EU Customers: All products at the end

Waste Electrical and ElectronicEquipment (WEEE)47Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Symbol

AP-7131N-FGR Access Point: Installation Guide 487 Motorola’s Enterprise Mobility Support CenterIf you have a problem with your equipment, contact Ent

ROHS Compliance498 ROHS Compliance O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。对销售之

AP-7131N-FGR Access Point: Installation Guide 50

MOTOROLA INC1303 E. ALGONQUIN ROADSCHAUMBURG, IL 60196http://www.motorola.com72E-126726-01 Revision AAugust 2009

Introduction11 IntroductionAs a standalone access point, an AP-7131N-FGR provides small and medium-sized businesses with a consolidated wired and wire

AP-7131N-FGR Access Point: Installation Guide 21.1 Document ConventionsThe following graphical alerts are used in this document to indicate notabl

Hardware Installation32 Hardware InstallationAn AP-7131N-FGR access point installation includes mounting the access point, connecting the access point