Motorola MC65 Especificaciones descargar pdf (Pagina 39)

Accessories 2 - 13

Figure 2-12

Name Servers Tab

6. Enter the appropriate DNS, Alt DNS, WINS, and Alt WINS server addresses.

7. Tap ok.

Figure 2-13

Adapters Dialog Box

8. Tap ok to confirm the setup.

9. Tap ok to exit.

Charging and Communication

Insert the MC65 into a slot to begin charging.

LED Charging Indicators

The MC65’s charge LED shows the status of the battery charging in the MC65. See Table 1-1 on page 1-6 for

charging status indications.

The 3600 mAh battery fully charges in approximately six hours.

Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the

MC65.

To accomplish this, for small periods of time, the MC65 alternately enables and disables battery charging to

keep the battery at acceptable temperatures. The MC65 indicates when charging is disabled due to abnormal

temperatures via its LED. See Table 1-1 on page 1-6.

LED Communication Indicators (CRD5500-4000ER)

There are two LEDs on the front of the cradle and two on the Ethernet 2 port. The green Speed LED lights to

indicate that the transfer rate is 100 Mbps. When the LED is not lit the transfer rate is 10 Mbps. The yellow Link

LED blinks to indicate activity, or stays lit to indicate that a link is established. When it is not lit it indicates that

there is no link.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 129 130

Sin comentarios

Motorola MC65 Especificaciones Pagina 39