Motorola BSR 64000 Guía para resolver problemas descargar pdf (Pagina 29)

Checking Physical Equipment

2-29

Port LEDs are grouped vertically. A number to the right each LED group indicates

the channel number associated with the group. The single downstream channel is

numbered 0 and the four upstream channels are numbered 0, 1, 2, 3. Table 2-5

describes the possible display states of these LEDs during operation.

OC3/OC12 POS Resource Module LEDs

The OC3/OC12 POS Resource Module has two groups of LEDs that indicate its

operational status:

• Module LEDs

• Per-Port LEDs

The following subsections describe the possible display states of these LED types.

Module LEDs

The OC3/OC12 POS Resource Module LEDs are visible on the module front

panel and are labeled: Fail, Status, and Alarm.

Table 2-5 BSR 64000 Downstream and Upstream Port LED Display States

Link Fail Interpretation

Green Off Normal operating status.

Green Red Operating with an alarm condition detected.

Note: An alarm condition detected for an individual port

also causes the System Alarm LED to light.

Off Red Failed port. Port is not operational.

Off Off Port is not configured.

Note: Check module LEDs to determine if the module is

receiving power.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 145 146

Sin comentarios

Motorola BSR 64000 Guía para resolver problemas Pagina 29