Motorola CB3000 - Client Bridge - Wireless Access Point Guía de usuario Pagina 33

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 106
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 32
Network Configuration 3-9
Figure 3.4 WEP Configuration
3. Configure the remainder of the fields, as appropriate, per the following descriptions.
Authentication Type Specify whether a shared key is implemented between the CB3000 and its
connected device or no key is used (Open System). If a shared key is used,
both the CB3000 and its connected device are required to use the same key
(1 through 4) to interoperate. A shared key increases the level of security
within the network as opposed sending information without one.
Default Transmit Key Specify which one key is used to transmit WEP algorithm information
between the CB3000 and its connected device.
WEP Encryption Select a WEP encryption model:
64-bits - Encrypts using a 40-bit key. The keys are 10 hexadecimal
characters in length.
128 bits - More secure. Encrypts using a 104-bit key. The keys are 26
hexadecimal characters in length.
Vista de pagina 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 105 106

Comentarios a estos manuales

Sin comentarios