Motorola CB3000 - Client Bridge - Wireless Access Point Guía de usuario Pagina 69

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 106
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 68
Management Options 4-11
Figure 4.7 SNMP Access Control
2. Select the Enable SNMP Access checkbox to enable/disable the CB3000 SNMP interface
3. Enter a 4-32 character string for read-only SNMP permissions in the Read Only field. The default is
"public".
4. Enter a 4-32 character string for read/write SNMP permissions in the Read Write field. The default is
"private".
5. Enter Start IP and End IP addresses to specify a range of users that can access the CB3000 SNMP
interface. Use just the Start IP Address field to specify a single SNMP user. To leave access
unrestricted, do not enter an IP address.
For additional access control, an SNMP-capable client can be set up whereby only the administrator can
use a read/write community definition.
6. Click Add to add the specified IP address(es).
Once added, those IP addresses with an allowed designation display within the Allowed IP Addresses
table.
Vista de pagina 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 105 106

Comentarios a estos manuales

Sin comentarios