Motorola SBV6120E Guía de instalación descargar pdf (Pagina 17)

3 Installing the Digital Voice Modem 17

POWER

32145

POWER

32145

Testing the Connections

To verify that all the components were properly installed, perform the following connectivity test:

1. Power on your computer.

2. Check the LEDs on the SBV6120 front panel.

The TEL 1 and TEL 2 LEDs should be on, if the SBV6120 was provisioned for voice

service. Otherwise, TEL 1 and TEL 2 will be off.

The remaining LEDs should be on or flashing.

Note: Refer to Front Panel Description for LED status information.

3. Open a web browser.

4. Go to any website to check for an Internet connection.

5. Check the telephone for a dial tone. If there is no dial tone, then your telephone line is not

set up for voice service.

Note: Contact your service provider to provision the telephony line(s).

If the connectivity test failed, see Troubleshooting Tips for a p

ossible solution.

You may now wall mount your SBV6120 digital voice modem. See Wall Mounting the SBV6120

for more in

formation.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

Sin comentarios

Motorola SBV6120E Guía de instalación Pagina 17