Motorola SG 2000 Instrucciones de operaciones descargar pdf (Pagina 11)

-2

2 Overview

AT&T SLW2500 Installation and Operation Manual

Housing

The SLW2500 optical node is furnished in an aluminum housing that protects the electronics

from weather and dissipates internally generated heat.

Figure 2-1 illustrates the SLW2500 housing and provides its dimensions:

Figure 2-1

SLW2500 housing dimensions — front and side view

12.25

21.60 10.99

34 OUT

7 8

Coaxial cable connections to the housing are made using conventional 5/8 inch

× 24 threads per

inch, stinger-type connectors. For strand mounting, the optional bracket must be used. If the

node is configured for strand mounting, the bracket is installed on the node at the factory. The

bracket provides two clamps, located 16 and 7/8 inches apart, that secure the strand with

5/16

× 20 stainless steel bolts.

Mounting Holes

Two threaded holes are located on the horizontal center-line on the rear of the housing. These

5/16”

× 18” × ¾” holes are separated by eleven inches center-to-center and can be used for

pedestal or surface mounting.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 52 53

Sin comentarios

Motorola SG 2000 Instrucciones de operaciones Pagina 11