Motorola DSR4410 Guía de instalación descargar pdf (Pagina 4)

Showtime East Digital IRD Rollout DSR 4410 Installation Instructions

Figure 2: DSR-4410 Rear Panel

3. Installation Information

• Follow steps 1 through 32 to complete the DSR-4410 installation and authorization.

• For questions regarding the Showtime East IRD installation or DSR-4410 IRD, please contact

Motorola at 1-866-276-4327.

3.1 Physical Installation

1. Install the receiver in a 19-inch universal rack and connect the power cord to an

available AC outlet.

2. Apply AC power to the unit. All LED’s on the DSR will go through a self-test and the

LCD will temporarily display “MOTOROLA DSR4410” and the firmware version.

Once the unit has completed the power up sequence, it will display the Main Menu as

shown below:

DSR4410

◄ ►E →Install →Channel →Status →Diag

• When the unit has power, the front panel Liquid Crystal Display (LCD) will display

characters, and at least one Light Emitting Diode (LED) should be lit. If the LCD

backlight is not on, press any front panel directional button (3456Enter) to light.

• If the unit fails to power up properly contact Motorola at 1-866-276-4327.

All information contained in this document is Proprietary to Motorola Inc. and is disseminated solely for the

convenience and support of its customers.

4 / 7

1 2 3 4 5 6 7

Sin comentarios

Motorola DSR4410 Guía de instalación Pagina 4