Motorola AP-621 Series Guía de instalación descargar pdf (Pagina 16)

AP-621 Series Access Point Installation Guide

c. Connect the power supply line cord to the power adapter.

d. Attach the power adapter cable to the DC-48V power connector on the access point.

e. Attach the power supply line cord to a power supply.

5. Verify the behavior of the access point LEDs. For more information, see “

LED Indicator” on

page 15.

6. Align the bottom of the ceiling T-bar with the back of the access point.

7. Orient the access point chassis by its length and the length of the ceiling T-bar.

8. Rotate the access point chassis 45 degrees clockwise.

9. Push the back of the access point chassis on to the bottom of the ceiling T-bar.

10. Rotate the access point chassis 45 degrees counter-clockwise. The clips click as they fasten

to the T-bar.

11. Verify the behavior of the LEDs. For more information, see “

LED Indicator” on page 15.

12. The access point is ready to configure. For information on basic access point device

configuration, see “

Defining a Basic Configuration” on page 17.

AP621 IG.book Page 12 Tuesday, September 20, 2011 3:18 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Sin comentarios

Motorola AP-621 Series Guía de instalación Pagina 16