Motorola AP-650 Series Guía de instalación descargar pdf (Pagina 20)

Hardware Installation

Altitude 4600 Series Access Point Installation Guide20

7 Snap the clips of the light pipe into the bottom of the case.

8 Fit the light pipe into hole in the tile from its unfinished side.

9 Attach any safety wire to the safety wire tie point or security cable to the unit’s lock

port.

10 Bring the tile into the ceiling space.

11 Plug the Ethernet cable into the unit and to a switch with an 802.3af-compatible

power source.

12 Verify the unit has power by observing the LEDs.

13 Place the ceiling tile back in its frame.

14 Snap the badge onto the light pipe from the finished side of the tile.

Altitude 4600 Series Antenna Options

Extreme Networks supports two antenna suites for the external antenna model. One

antenna suite supporting the 2.4 GHz band and another antenna suite supporting the 5

GHz band. Select an antenna model best suited to the intended operational

environment of your external antenna model. See the Altitude 35xx/46xx AP Antenna

Selection Guide available from

http://www.extremenetworks.com/go/documentation for details.

LED Indicators

Both the integrated antenna model and external antenna model have LED activity

indicators on the front of the case for use with wall mount deployments. With the

external antenna model unit mounted above a ceiling, LEDs are at the center of an oval

badge on the ceiling; a light pipe enables viewing the back LEDs through the ceiling

tile.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 45 46

Sin comentarios

Motorola AP-650 Series Guía de instalación Pagina 20