Motorola AP6562 Guía de instalación descargar pdf (Pagina 9)

Installation Guide 9

2 Hardware Installation

2.1 Installation Instructions

To prepare for the installation:

1. Match the model number on the purchase order with the model numbers in the packing list and on the

case of the access point.

2. Verify the contents of the box include the intended AP6562 access point, and the included hardware

matches the package contents for an internal antenna access point (see

Internal Antenna Model

Package Contents on page 7

) or external antenna access point (see External Antenna Model

Package Contents on page 8

3. Review site survey and network analysis reports to determine the location and mounting position for the

AP6562 access point.

4. Connect a CAT-5 or better Ethernet cable to a compatible 802.3at power source and run the cable to the

installation site. Ensure there is sufficient slack on the cable to perform the installation steps.

NOTE When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable

is recommended for Gigabit operation.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Sin comentarios

Motorola AP6562 Guía de instalación Pagina 9