Motorola WE800G - Wireless EN Bridge Guía de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 70
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
SECTION 2, INSTALLATION
2-1
Section 2:Installation
To get your network up and running:
! Setup your hardware.
! Insert the CD-ROM for Software Setup. Follow the prompts.
If you prefer to setup the Access Point’s (AP) software manually,
refer to the Manual Software Setup found in this section.
The following sections provide detailed instructions for completing
these tasks.
Hardware Setup
Hardware setup includes:
! Antenna Installation: verifying the antenna is connected to the
unit.
! Physical Installation: where you physically place your unit.
! Electrical Connection: how to power your unit.
Antenna Installation
When shipped, the antenna is already installed on the main unit. If
you have to detach and reattach the antenna to the main unit:
1 Take the bottom of the antenna and locate, on the right backside
of the AP, the threaded knob.
2 Screw the antenna connector clockwise on to the threaded knob
until firmly seated. Do not overtighten.
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 69 70

Comentarios a estos manuales

Sin comentarios