Motorola MS3204 Especificaciones descargar pdf (Pagina 104)

9 - 2 Symbol MiniScan MSXX04 Series Integration Guide

Troubleshooting

Table 9-1

Troubleshooting

Problem Possible Cause Possible Solutions

No red LED or nothing

happens during a scan

attempt.

No power to the scanner. Check the system power.

Confirm that the correct host interface cable is

used.

Connect the power supply.

Re-connect loose cables.

Scanner cannot read the bar

code.

Interface/power cables are

loose.

Re-connect loose cables.

Scanner is not programmed

for the correct bar code type.

Make sure the scanner is programmed to read the

type of bar code to be scanned.

Scan other bar code(s) and bar code types.

Incorrect communication

parameters.

Set the correct communication parameters (baud

rate, parity, stop bits, etc.)

Bar code symbol is

unreadable.

Check the symbol to make sure it is not defaced.

Try scanning similar symbols of the same code

type.

Inappropriately hot

environment.

Remove the scanner from the hot environment,

and allow it to cool down.

Laser activates, followed by a

beep sequence.

Beeper is configured. Refer to

Table 3-1 on page 3-7

for beeper

indication descriptions.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 259 260

Sin comentarios

Motorola MS3204 Especificaciones Pagina 104