Motorola RS507-IM2xxxxSTWR Especificaciones descargar pdf (Pagina 23)

1 - 6 RS507 Hands-Free Imager Product Reference Guide

Getting Started - Cordless Configuration

Charge the Battery

Before using the Imager, charge the battery. The SAC5070 8-Bay Battery Charger supports both standard and

extended capacity batteries.

To charge the Imager battery, refer to the SAC5070 8-Bay Battery Charger Quick Reference Guide, p/n

72-115989-01 available at: www.motorola.com/enterprisemobility/manuals and search for 'SAC5070'.

Install the Battery

1. Align the battery on top of the Imager.

2. Push the battery all the way into the Locking Slots of the Imager.

3. Firmly press the battery into the Imager until a “click” is heard ensuring the Battery Release Latch is fully

engaged with the Imager.

Figure 1-5

Install the Battery

Remove the Battery

1. Hold the Imager in one hand.

2. Press the Battery Release Latch.

3. Pull up the battery to release it from the Locking Slots of the Imager.

Wearing the Imager

1. Slide the Imager onto the index and middle fingers with the Scan Trigger next to the thumb.

2. Tighten the Finger Strap.

Locking Slots

Battery

Battery Release Latch

NOTE When using the Imager for the first time, press and release the Scan Trigger to enable the manual

triggering mode (this operation disables the default auto triggering mode).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 204 205

Comentarios a estos manuales

Sin comentarios