Motorola MC3000 Especificaciones descargar pdf (Pagina 28)

1 - 10 MC3000 Integrator Guide

Starting the Mobile Computer

When the mobile computer is powered on for the first time, it initializes. The Symbol Splash screen appears for a

short period of time, followed by the

Calibration screen.

Figure 1-7

Symbol Splash Screen

After the calibration procedure is performed the factory default settings launch the

Demo window. Application

specific shells may provide application specific windows instead of the

Demo window. These screens also appear

when a cold boot is performed.

If the mobile computer does not power on, see Resetting the Mobile Computer on page 1-11.

Calibration Screen

Use the Calibration screen to align the touch screen:

1. Remove the stylus from the stylus holder.

2. Carefully press and briefly hold the tip of stylus on the center of the Calibration screen target. Repeat the

procedure as the target moves and stops at different locations on the screen. This enters the new calibration

settings.

Figure 1-8

Calibration Screen

3. Once all of the new calibration settings are input, the Confirm Calibration Resave screen appears. Tap the

screen within 30 seconds to save the new calibration settings or allow the 30 second timer to expire and the

new calibration settings are not saved.

Calibration Screen Confirm Calibration

Resave Screen

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 215 216

Sin comentarios

Motorola MC3000 Especificaciones Pagina 28