Motorola MC3000 Especificaciones descargar pdf (Pagina 91)

Creating/Loading Hex Images 6 - 7

Sending the Hex Image

Once the hex file is built, it can be downloaded to the mobile computer.

To load the hex files on to the mobile computer:

1. For downloads using either a serial or a USB connection, connect the mobile computer to the development

computer using the Single Slot Serial/USB cradle or MC3000 Communication/Charge cables.

2. On the 28-key, 38-key and 48-key keypads:

a. Press and simultaneously hold the scan button or trigger, the

1, 9 and Power keys.

b. Continue to hold the scan button or trigger while releasing the

1, 9 and Power keys until the mobile

computer resets into IPL.

3. On the 20-key keypad:

a. Press and simultaneously hold the scan button or trigger, the

1, 9, MENU and Fn keys.

b. Continue to hold the scan button or trigger while releasing the

1, 9, MENU and Fn keys until the mobile

computer resets into IPL.

4. When the

Initial Program Loader menu appears, release the Scan button or trigger.

Figure 6-6 Initial Program Loader Menu

1. Choose

Auto Select or use the up and down scroll buttons to select the partition to download, then press Enter.

NOTE The cradle or Communication/Charge cable must be connected with the appropriate power supplies and

connected to a power source for the mobile computer to reset into IPL.

Initial Program Loader

Platform

Application

Config Block

Windows CE

Monitor

Splash Screen

Power Micro

Partition Table

Command File

System Reset

Auto Select

caution To ensure a successful download, do not remove power from the mobile computer while in IPL mode.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 215 216

Sin comentarios

Motorola MC3000 Especificaciones Pagina 91