Motorola MC9190-G Especificaciones descargar pdf (Pagina 45)

Accessories 2 - 21

Magnetic Stripe Reader

This section describes how to set up and use the snap-on MSR with the MC9190-G. The MSR snaps on to the

bottom of the MC9190-G and can be easily removed when not in use.

Figure 2-17

Magnetic Stripe Reader

When attached to the MC9190-G, the MSR:

•

Provides power for operating the MC9190-G, with the appropriate power connection.

•

Allows the MC9190-G to capture data from magnetic stripe cards. (To download MSR data capture software,

visit:

http://www.supportcentral.motorola.com

•

Provides serial connection through the serial pass-through port for communication with a serial device, such

as a host computer. For communication setup procedures, see Serial Communication Setup on page 2-34.

•

Provides USB connection through the USB pass-through port for communication with a USB device, such as

a host computer. For communication setup procedures, see Serial Communication Setup on page 2-34.

•

Charges the MC9190-G’s battery, when used with the appropriate power supply.

Card Reader Slot

Latches

Power Port

Communications Port

Pogo Pin

Pass-through

Connector

Latch Grip

NOTE When a MC9190-G with Windows Mobile 6.5 is connected to a host computer through the MSR and an

ActiveSync connection is made, the WLAN and WWAN radios (if applicable) are disabled. This is a

Microsoft security feature to prevent connection to two networks at the same time.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 189 190

Sin comentarios

Motorola MC9190-G Especificaciones Pagina 45