Motorola LM2000 Guía de instalación descargar pdf (Pagina 44)

44 DC 900-1331F

Freeway 2000/4000 Hardware Installation Guide

Step 11:

Conﬁgure the console terminal to operate with the following communications param-

eters:

• 9600 bits per second

• 8 bits data

• 1 stop bit

• No parity

• xon/xoff enabled

The terminal you just installed is called the “local console.” If you have problems during

the installation procedures, your Simpact customer service representative may ask you

to also install a “remote console” that operates through a modem. Appendix A describes

how to install a remote console.

Step 12:

Freeway includes a SCSI II-style high-density connector on the back panel. This con-

nector allows the use of external SCSI devices. If no external SCSI devices are used, a

termination connector (included with your Freeway shipment unless you have pur-

chased a Freeway with a CPU 8 non-SCSI board) must be attached to the Freeway con-

nector as shown in Figure 2–8.

Caution

To maintain data integrity, the SCSI II-style termination connec-

tor must be installed if external SCSI devices are not attached. This

is particularly important if Freeway includes an optional hard disk

or ﬂoppy disk.

Step 12 is

2000/4000

only

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 85 86

Sin comentarios

Motorola LM2000 Guía de instalación Pagina 44