Motorola Netopia Embedded Software Especificaciones descargar pdf (Pagina 265)

100

101

265

set ip ip-ppp [

vccn

] rip-receive { off | v1 | v2 | v1-compat | v2-MD5 }

Speciﬁes whether the Motorola Netopia® Gateway should use Routing Information Protocol (RIP) broad-

casts to update its routing tables with information received from other routers on the other side of the PPP

link.

If you specify v2-MD5, you must also specify a rip-receive-key. Keys are ASCII strings with a maximum of

31 characters, and must match the other router(s) keys for proper operation of MD5 support.

set ip ip-ppp vcc

igmp-null-source-addr [ on | off ]

Speciﬁes whether you want the Motorola Netopia® Gateway to identify the source IP address of every IGMP

packet transmitted from this interface as 0.0.0.0 when mcast-fwd is set to on. This complies with the

requirements of TR-101, and removes the need for a publicly advertised IP address on the WAN interface.

set ip ip-ppp vcc

mcast-fwd [ on | off ]

Speciﬁes whether you want the Motorola Netopia® Gateway interface to act as an IGMP proxy host.

set ip ip-ppp vcc

unnumbered [ on | off ]

Speciﬁes whether you want the Motorola Netopia® Gateway to have its WAN interface unnumbered, i.e. set

to 0.

set ip ip-ppp vcc

dns acquired-dns-priority [ 0 - 255 ]

Sets the priority for DNS acquired via PPP. See “Domain Name System Settings” on page 255 for more

information.

1 2 ... 260 261 262 263 264 265 266 267 268 269 270 ... 367 368

Comentarios a estos manuales

Sin comentarios

Motorola Netopia Embedded Software Especificaciones Pagina 265

Comentarios a estos manuales

Relacionado con productos y manuales para Routers Motorola Netopia Embedded Software