Motorola Netopia Embedded Software Especificaciones descargar pdf (Pagina 289)

289

set security ipsec tunnels name "123" IKE-mode

isakmp-SA-encrypt (DES) { DES | 3DES }

See page 146 for details about SafeHarbour IPsec tunnel capability.

set security ipsec tunnels name "123" IKE-mode

ipsec-mtu

mtu_value

The Maximum Transmission Unit is a link layer restriction on the maximum number of bytes of data in a sin-

gle transmission. The maximum allowable value (also the default) is 1500, and the minimum is 100.

set security ipsec tunnels name "123" IKE-mode isakmp-SA-hash

(MD5) {MD5 | SHA1}

See page 146 for details about SafeHarbour IPsec tunnel capability.

set security ipsec tunnels name "123" IKE-mode PFS-enable

{ off | on }

See page 146 for details about SafeHarbour IPsec tunnel capability.

set security ipsec tunnels name "123" IKE-mode invalid-spi-recovery

{ off | on }

Enables the Gateway to re-establish the tunnel if either the Motorola Netopia® Gateway or the peer gateway

is rebooted.

set security ipsec tunnels name "123" xauth enable {off | on }

Enables or disables Xauth extensions to IPsec, when IKE-mode neg-method is set to aggressive.

Default is off.

set security ipsec tunnels name "123" xauth username

username

Sets the Xauth username, if Xauth is enabled.

set security ipsec tunnels name "123" xauth password

password

Sets the Xauth password, if Xauth is enabled.

set security ipsec tunnels name "123" nat-enable { on | off }

Enables or disables NAT on the speciﬁed IPsec tunnel. The default is off.

set security ipsec tunnels name "123" nat-pat-address

ip-address

Speciﬁes the NAT port address translation IP address for the speciﬁed IPsec tunnel.

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 367 368

Sin comentarios

Motorola Netopia Embedded Software Especificaciones Pagina 289