Motorola Netopia Embedded Software Especificaciones descargar pdf (Pagina 277)

277

set ip static-routes destination-network

net_address

interface { ip-address | ppp-vccn }

Speciﬁes the interface through which the static route is accessible.

set ip static-routes destination-network

net_address

gateway-address

gate_address

Speciﬁes the IP address of the Gateway for the static route. The default Gateway must be located on a net-

work connected to the Motorola Netopia® Gateway conﬁgured interface.

set ip static-routes destination-network

net_address

metric

integer

Speciﬁes the metric (hop count) for the static route. The default metric is 1. Enter a number from 1 to 15

for the integer argument to indicate the number of routers (actual or best guess) a packet must traverse to

reach the remote network.

You can enter a metric of 1 to indicate either:

• The remote network is one router away and the static route is the best way to reach it;

• The remote network is more than one router away but the static route should not be replaced by a

dynamic route, even if the dynamic route is more efﬁcient.

set ip static-routes destination-network

net_address

rip-advertise [ splitHorizon | always | never ]

Speciﬁes whether the gateway should use Routing Information Protocol (RIP) broadcasts to advertise to

other routers on your network and which mode to use. The default is splitHorizon.

delete ip static-routes destination-network

net_address

Deletes a static route. Deleting a static route removes all information associated with that route.

IPMaps Settings

set ip-maps name <

name

> internal-ip <

ip address

Speciﬁes the name and static ip address of the LAN device to be mapped.

set ip-maps name <

name

> external-ip <

ip address

Speciﬁes the name and static ip address of the WAN device to be mapped.

Up to 8 mapped static IP addresses are supported.

1 2 ... 272 273 274 275 276 277 278 279 280 281 282 ... 367 368

Sin comentarios

Motorola Netopia Embedded Software Especificaciones Pagina 277