Motorola 6700 Especificaciones descargar pdf (Pagina 16)

2 - 2 Symbol SE6700 Integration Guide

Mounting

There are four mounting holes (#0 - 48) and two locator holes on the bottom of the chassis (see Figure 2-1). The

Symbol SE6700 can be mounted in any orientation without degradation in performance.

When installing the mounting screws, ensure they do not protrude past the mounting hole depth (6.0 mm) in the

chassis; use 5.5 mm maximum mounting screw thread engagement. Recommended mounting screw torque is 1.5

±0.2 in-lb.

Figure 2-1

Symbol SE6700 Mounting Diagram

NOTE Mounting the Symbol SE6700 in a non-upright position results in images rotated accordingly in snapshot

or video mode.

Notes: Unless otherwise specified:

• Nominal aiming pattern envelope is 30

x 40

• Nominal imaging FOV envelope is 35

x 44

• Maximum envelopes do not include integration

tolerances.

• Mounting and location information:

see Hole Information.

• General tolerance: ±0.25 mm / ±0.01 in.

• This is a reference drawing and is not intended

to specify or guarantee all possible integration

requirements for this engine.

Hole Information

A. Mounting hole for #0 BT screw: 0.188 in. engagement.

B. Hole for Ø2 mm, 5.5 mm max. long locating pin if desired.

C. Fixture hole for manufacturing.

Hole location tolerance = ±0.15 mm / ±0.006 in.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Sin comentarios

Motorola 6700 Especificaciones Pagina 16