Motorola 6700 Especificaciones Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 54
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
Installation 2 - 5
Polysiloxane Coating
Polysiloxane type coatings are applied to plastic surfaces to improve the surface resistance to both scratch and
abrasion.
To gauge a window's durability, use ASTM standard D1044, Standard Test Method for Resistance of Transparent
Plastics to Surface Abrasion (the Taber Test), which quantifies abrasion resistance as a percent increase in haze
after a specified number of cycles and load. Lower values of the increase in haze correspond to better abrasion
and scratch resistance. See Table 2-2.
A Word About Coatings
In all cases, adhere to the minimum tilt angle specified in Figure 2-2 on page 2-6. When the Symbol SE6700 is set
to an exposure time less than 10 milliseconds and gain less than 127, anti-reflection coating is not necessary.
Otherwise, consider single-side or double-side AR coatings. If using an anti-reflective coating, polysiloxane coating
is not required. Recess the exit window to minimize scratches and digs.
If using an anti-reflective coating, the specifications in Table 2-3 apply.
Table 2-2
Taber Test Results on Common Exit Window Materials
Sample
Haze 100
cycles
Haze 500
cycles
Abrasion
Resistance
Chemically Tempered
Float Glass
1.20% 1.50% Best
PMMA with
Polysiloxane
Hardcoat
3% 10%
ADC 5% 30%
PMMA 30% Worst
* All measurements use a 100 gram load and CS-10F Abraser.
Table 2-3
AR Coatings Specifications
Feature Description
Material Both tempered glass and plastic (e.g., CR-39 or hard coated
acrylic) exit windows can be AR coated. AR coated glass is
easier and more durable because of a better adhesion property
on the glass structure. In addition, it can be more cost effective
to put an AR coating on the glass substrate rather than on the
plastic.
AR Coating
Specification
1. One side tempered AR coating: 92% minimum within
spectrum range from 450nm to 700nm.
2. Double side AR coating: One side AR coating must be 97%
minimum within spectrum range from 450nm to 700nm.
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 53 54

Comentarios a estos manuales

Sin comentarios