Chapter 4 Electrical Interface
Overview
The Symbol SE6700 has one 30-pin connector. See Figure 2-1 on page 2-2 for the pin one location, on the side
opposite the aiming/illumination system.
Symbol SE6700
Table 4-1 lists the pins and signals of the 30-pin connector on the Symbol SE6700.
Table 4-1
Symbol SE6700 Signal Information
Pin
Number
SE6700 Signal
Name
I/O Notes
30 GND Pwr Ground
29 PCLK O Pixel Clock
28 GND Pwr Ground
27 LINE_VALID O Valid Line Pixel Data
26 VCC_ILLUM Pwr Illumination Power
25 VCC_AIM Pwr Aiming Power
24 RESET* I Reset Pin
23 VCC_CAMERA Pwr Camera Power
22 TRIGGER I Activates Snapshot Sequence
21 ILLUM_EN* I LED Illumination Control
(when LEFT_DSBL and RIGHT_DSBL are each low)
A low turns the illumination LEDs on.
A high turns the illumination LEDs off.
Comentarios a estos manuales