Motorola AP 7161 Guía de instalación Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
28 AP 7161 Access Point
4. Position the Access Point bracket section so that the bottom of the section with the straight (not bevel cut)
side is oriented toward the bottom side of the AP with the gore vent. Using a torque wrench or a ratchet
and a 10mm socket, or an adjustable wrench, attach (but don’t tighten) the Access Point bracket section
to the AP 7161 with the four M6 flange screws
5. Insert two M6 hex flange screws into the bottom holes on the sides of the Access Point bracket section.
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 79 80

Comentarios a estos manuales

Sin comentarios