Motorola ES400 Guía de usuario Pagina 153

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 212
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 152
Accessories 12 - 3
Single Slot USB Cradle
Use the Single Slot USB Cradle to charge the ES400 and to synchronize information between the ES400 and a
host computer.
Charging the ES400 Battery
To charge the ES400 battery:
1. Connect the microUSB connector of the USB Rapid Charge Cable to the USB port on the back of the cradle.
2. Connect the USB-A connector of the USB Rapid Charge Cable to the USB port on the power supply.
3. Plug the power supply into an AC outlet.
Figure 12-2
Single Slot USB Cradle Setup
4. Place the ES400 into the cradle.
The ES400’s LED indicates the status of the battery charging in the ES400. See Table 2-4 on page 2-20 for
charging status indications. The 1540 mAh battery fully charges in less than three hours and the 3080 mAh battery
fully charges in less than six hours.
Communication with Host Computer
To communicate with a host computer:
1. Ensure ActiveSync is installed and configured on the host computer. See ActiveSync on page 12-11 for more
information.
2. Connect the microUSB connector of the USB Rapid Charge Cable to the USB port on the back of the cradle.
3. Connect the USB-A connector of the USB Rapid Charge Cable to the USB port on the host computer.
NOTE The Host Adapter can only be connected to the ES400 and not the Single Slot USB cradle.
Power Supply
USB Rapid Charge Cable
Vista de pagina 152
1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 211 212

Comentarios a estos manuales

Sin comentarios