
Accessories 12 - 9
Host Adapter
Use the host adapter to connect accessory devices, such as printer or USB flash drives) to the ES400.
Figure 12-12
Host Adapter Connection
1. Lift the rubber door.
2. Connect the Host Adapter to the microUSB port on the side of the ES400.
3. Connect the a device’s connector to the Host Adapter.
NOTE The Host Adapter can only be connected to the ES400 and not the Single Slot USB cradle.
CAUTION Do not connect a USB device that draws more than 100 mA. If a device is connected that draws more than
100 mA, the ES400 displays a Warning dialog box. Remove the device from the Host Adapter.
NOTE When connecting a USB Flash drive to the Host Adapter, the USB Flash Drive appears in File Explore as Hard
Drive under My Device folder.
Comentarios a estos manuales