Motorola FR68 Series Guía de usuario descargar pdf (Pagina 107)

GSM Configuration



105

3. Select a ring tone for incoming calls from the Ring tone: drop-down list. To hear a sample of

the selected ring tone, tap

. Tap to end the ring tone.

NOTE To use custom .wav, .mid, or .wma files as ring tones, use ActiveSync on the host computer to

copy the file to the /Windows/Rings folder on the FR6874/FR6876. Then select the sound from

the ring tone list

4. Select a keypad tone from the Keypad: drop-down list. This selection determines the tone

that sounds when entering a phone number on the keypad.

Select

Short tones or Long tones to specify the duration of the sound when you press a

number on the keypad.

Select

Off to disable tones.

NOTE Turning off sounds saves power and prolongs battery life.

Security



Enabling a PIN

NOTE Place emergency calls at any time, without requiring a PIN or a SIM card.

To require a PIN when using the phone:

1. From the Phone tab (Figure 7-11), select the Require PIN when phone is used check box under

Security.

Figure 7-12

Enter PIN

2. Use the touch keypad to enter a four to eight digit PIN.

3. Tap Enter to enable the PIN and return to the Phone tab.

Changing a PIN

CAUTION If you enter an incorrect PIN, the message “SIM PIN incorrect: Try again” appears. After

three consecutive incorrect attempts, the SIM card is blocked. The phone does not allow

you to attempt to enter your PIN again and you must obtain a PIN Unblock Key from your

service provider.

1. From the Phone tab (Figure 7-11), tap Change PIN.

Use the touch keypad to enter the current PIN.

Tap Enter.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 141 142

Sin comentarios

Motorola FR68 Series Guía de usuario Pagina 107