Motorola FR68 Series Guía de usuario Pagina 126

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 142
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 125
Maintenance
&
Troubleshooting
124
Table 9-1 Troubleshooting the FR68 Series (Continued)
Problem
Cause
Solution
FR68 Series shuts
off.
Battery is
over-temperature.
Battery temperature >40(
104°F) or <-10(14°F)
Tapping the
window buttons or
icons does not
activate the
corresponding
feature.
Screen is not calibrated
correctly.
Re-calibrate the screen. See Calibrating the Screen on
Page 20.
Too many files stored on
the FR68 Series.
Delete unused memos and records. If necessary,
save these records on the host computer (or use an
SD card for additional memory).
A message
appears stating
that the FR68
Series memory is
full.
Too many
applications
installed on the
FR68 Series.
Remove user-installed applications on the FR68 Series to
recover memory. Select
Start > Settings > System tab
and tap the
Remove Programs icon. Select the unused
program and tap Remove.
The FR68 Series’
battery is low.
Recharge the battery. FR68 Series
keeps powering
down to protect
memory contents.
The internal Bluetooth
radio is powered on
for a long time.
Because this mode requires battery power, power it off
when not needed.
Scanning application
is not loaded.
Load a scanning application on the FR68 Series.
See the system administrator.
Unreadable bar
code.
Ensure the symbol is not defaced.
Distance between exit
window and bar code is
incorrect.
Place the FR68 Series within proper scanning range.
FR68 Series is not
programmed for the bar
code.
Program the FR68 Series to accept the type of bar code
being scanned.
FR68 Series is not
prog rammed to
generate a beep.
If the FR68 Series does not beep on a good decode, set
the application to generate a beep on good decode.
The FR68
Series does not
accept scan
input.
Battery is low. If the scanner stops emitting a laser beam upon a trigger
press, check the battery level. When the battery is low,
the scanner shuts off before the FR68 Series low battery
condition notification. Note: If the scanner is still not
reading symbols, contact the distributor or Motorola.
Vista de pagina 125
1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 141 142

Comentarios a estos manuales

Sin comentarios