Motorola LD-W-1 Especificaciones descargar pdf (Pagina 24)

English Locomotive decoders 30s series

Page 24

After having started the programming mode (and when the

locomotive´s lighting flashes) you can program the decoder´s registers

as follows:

1. Choose the register you want to programm by setting the register´s

number like a Motorola locomotive address at your central unit.

Please note that with some central units a leading "0" has to be

entered.

2. Operate the direction switch. The lighting flashes faster.

3. Set the desired value of the register by setting the register´s value

as Motorola locomotive address at your central unit.

4. Operate the direction switch again. The lighting starts flashing

again.

Repeat the steps 1 to 4 for all registers you want to program. In order

to choose a register for programming or to enter a value for a register

you have to confirm the entered number like selecting a Motorola

locomotive address. The lighting shows which kind of entry the decoder

expects:

§ lighting flashes à entry of a CV´s number

§ lighting flashes faster à entry of a CV´s value

In order to stop the programming mode push "stop".

Programming with the CV-Navi

Instead of programming the configuration variables or registers of the

decoder using the digital central unit, you can use the free software CV-

Navi. You will find the free download under:

www.tams-online.de

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

Sin comentarios

Motorola LD-W-1 Especificaciones Pagina 24