Motorola LD-W-1 Especificaciones descargar pdf (Pagina 27)

Locomotive decoders 30s series English

Page 27

Name of CVs /

Registers

CV-

no.

Reg.

no.

Input value

(Default)

Remarks and Tips

Version 7 --- --- Read only in DCC format!

Programming

a SUSI module

(LD-G-33,

LD-G-34 and

LD-W-33 only)

7 02 9 To start the programming of a

CV of a SUSI module. The next

CV set, is valid for the SUSI-

module. The CV-no. is entered

without a leading "9".

Example: Programming the CV#902 of the SUSI module to the value "8":

By entering the value "9" for CV#7 of the decoder, the programming mode is

started. Next the CV of the SUSI module is chosen by entering a "2" or "02"

(leaving out the leading "9") and for the CV#902 the value "8" is set. The

decoder automatically goes back to the programming of it´s own CVs. In order

to programm another CV of the SUSI module, the operation has to be repeated

completely.

Manufacturer 8 --- (62) Read only in DCC format!

Reset 8 03 0 ... 255 Any input value restores the

settings in state of delivery.

9 48 0, 1 Numerical value*

(0) 31,5 kHz 0

Motor

frequency

(LD-G-31,

LD-G-33 and

LD-G-34 only)

17 kHz 1

Tip: In case that the locomotive´s driving characteristics are not satisfactory with

the standard setting of 31,5 kHz, the motor frequency of 17 kHz should be chosen.

9 48 0, 1 Numerical value*

(0) 480 Hz 0

Motor

frequency

(LD-W-32 only)

60 Hz 1

Tip: In case that the locomotive´s driving characteristics are not satisfactory with

the standard setting of 480 Hz, the motor frequency of 60 Hz should be chosen.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Comentarios a estos manuales

Sin comentarios

Motorola LD-W-1 Especificaciones Pagina 27

Comentarios a estos manuales