Motorola AT Commands G24-L Información técnica Pagina 244

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 522
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 243
Hardware Information
3-168 AT Commands Reference Manual January 31, 2007
+MGGIND, GSM/GPRS Service Indicator
This command configures the service indicator line of pin 49 of the 70 pin connector to be GPRS
or GSM registration indicator.
The IO line (pin 49) function according to the current registration state (in service or not) of the
specific service indicator configuration.
Note: IO line (pin 49) out come depends on +MCWAKE configuration.
The following table shows the +MGGIND parameters.
Example
AT+MGGINFD=0
OK
AT+MGGIND?
OK
+MGGIND: 0
AT+MGGIND=1
OK
AT+MGGIND?
+MGGIND: 1
OK
AT+MGGIND=?
+MGGIND: (0-1)
OK
Command Type Syntax Response/Action
Set
AT+MGGIND=<state> OK
or:
+CME ERROR: <err>
Read
AT+ MGGIND ? +MGGIND: <state>
OK
or:
+CME ERROR: <err>
Test
AT+ MGGIND =? +MGGIND: (list of supported
<state>s)
OK
Table 3-113: +MGGIND Parameters
<Parameter> Description
<state> 0 GPRS registration indicator.
1 GSM registration indicator.
Vista de pagina 243
1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 521 522

Comentarios a estos manuales

Sin comentarios