Motorola AT Commands G24-L Información técnica Pagina 407

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 522
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 406
Chapter 3: AT Commands Reference
January 31, 2007 AT Commands Reference Manual 3-331
NOP - Compatible
IGNORED (Compatible Only) Commands
The following commands return OK, but do not execute any operation. They are only used to
provide backward compatibility.
Command Description
F Selects the line modulation standard
L Monitors the speaker loudness
M Monitors the speaker mode
N Enables auto mode
P Selects pulse dialing
T Selects tone dialing
W Wait for dial tone
Y Disconnects on long space
&G Selects the guard tone
&J Jack type selection
&L Leased line operation
&M Asynch/synch mode connection
&P Selects pulse dialing
&Q Communications mode options
&R Selects the CTC controls
&S Defines the DSR behavior
&T Selects tone dialing
\A Sets the maximum MNP block size
\G Sets the use of the Xon/Xoff flow control
\J Adjusts the terminal auto rate
\K This command is supported for backward compatibility only, and has no effect.
\N Displays the link type
%C Enables/disables data compression
\B Transmits break to remote
\K Breaks control
+CBAND Changes band frequencies
Vista de pagina 406
1 2 ... 402 403 404 405 406 407 408 409 410 411 412 ... 521 522

Comentarios a estos manuales

Sin comentarios