Motorola RS409 Guía de usuario descargar pdf (Pagina 48)

2 - 16 WT41N0 User Guide

To select continuous items in a folder or list:

1. Open the folder or list.

2. Use the scroll keys to move to the first item to select.

3. Press SHIFT - scroll key (either up or down) to select the next item.

4. Repeat the SHIFT - scroll key combination to select remaining items.

5. Perform the desired function.

To select multiple items in a folder or list:

1. Open the folder or list.

2. Use the scroll keys to move to the first item.

3. Press CTRL - scroll key to move within the list. The item name is outlined.

4. Repeat step 3 to move to the desired item.

5. Press SPACE to highlight the item.

6. Repeat steps 3 through 5 until all items are selected.

7. Perform the desired function.

Screen Calibration

To calibrate the touch screen so the cursor on the touch screen aligns with screen taps:

1. Press Start > Settings > Control Panel > Stylus icon > Calibration tab > Recalibrate button.

2. Carefully press and briefly hold on the center of the Calibration screen target. Repeat the procedure as

the target moves and stops at different locations on the screen. This enters the new calibration settings.

Figure 2-12

Calibration Screen

3. Once all of the new calibration settings are input, tap the screen or press the ENTER button to save the

new calibration settings. Press ESC to discard the new calibration settings.

NOTE Not available on the Voice Only and non-touch configurations.

Calibration Screen Confirm Calibration

Screen

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 117 118

Sin comentarios

Motorola RS409 Guía de usuario Pagina 48