Motorola RS409 Guía de usuario Pagina 61

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 118
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 60
Data Capture 3 - 5
Figure 3-5
Sample Pairing Bar Code
4. Scan the pairing bar code. Note that when using the Voice Only WT41N0, use the Remote COntrol
software to display the pairing bar code on a computer monitor. Refer to the WT41N0 integrator Guide for
more information.
5. Point the RS507 to the bar code. The RS507 reads the bar code and begins pairing with the wearable
terminal. If required, enter PIN (12345). Tap Yes.
Refer to the RS507 Hands-free Imager Product Reference Guide for more information on the RS507.
DataWedge
DataWedge is an application that reads data from a scanning source, processes the data and sends the data
to an application as if the user is entering it on a keyboard. By default, DataWedge is disabled. To use
DataWedge
Enable DataWedge
To enable DataWedge:
1. Select Start > Settings > Control Panel > DataWedge icon.
2. Select Basic Configuration and then press ENTER.
3. Select 1. Barcode input and then press ENTER.
4. Select one of the following:
a. Press 1 to select 1. SSI Scanner Driver for the RS409 or the RS419 scanner.
b. Press 2 to select 2. Bluetooth SSI Scanner Driver for the RS507 Hands-free Imager.
5. Press 1 to select 1. Enabled.
6. Press 0.
7. Press 0.
8. Press 0.
9. Select OK to exit.
Vista de pagina 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 117 118

Comentarios a estos manuales

Sin comentarios