
6 - 8 WT41N0 User Guide
During data
communication, no
data was transmitted,
or transmitted data
was incomplete.
Wearable terminal
removed from
cradle or unplugged
from host computer
during
communication.
Replace the
wearable terminal
in the cradle, or reattach the
Synchronization cable and re-transmit.
Incorrect cable
configuration.
See the System Administrator.
Communication
software was
incorrectly installed
or configured.
Perform setup. Refer to the WT41N0 Integrator Guide for
details.
Ensure that Microsoft ActiveSync 4.5 or greater is installed on
the host computer.
No sound is audible. Volume setting is
low or turned off.
Adjust volume. Change volume settings by selecting Start >
Settings > Control Panel > Volume & Sounds icon > Volume
tab.
Move the slider to change the volume level or use volume
control on voice application.
Wearable terminal
turns itself off.
Wearable terminal
is inactive.
The
wearable terminal
turns off after a period of inactivity. If the
wearable terminal
is running on battery power, this period can
be set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes. If the
wearable
terminal
is running on external power, this period can be set to
1, 2, 3, 5, 10, 15 and 30 minutes.
Check the power settings by selecting Start > Settings >
Control Panel > Power icon > Advanced tab.
Change the setting if you need a longer delay before the
automatic shutoff feature activates.
Voice Only
WT41N0 was set to
suspend.
Return Voice Only WT41N0 suspend setting to factory default
(disabled).
Battery is depleted. Replace or recharge the battery.
Battery is not
inserted properly.
Insert the battery properly (see
Installing and Removing the
Main Battery on page 1-6
).
The
wearable
terminal
’s battery is
low and it powers
down to protect
memory content.
Replace or recharge the battery.
Table 6-1
Troubleshooting the Wearable Terminal (Continued)
Problem Cause Solution
Comentarios a estos manuales