Motorola RS409 Guía de usuario Pagina 93

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 118
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 92
Maintenance & Troubleshooting 6 - 9
A message appears
stating that the
wearable terminal
memory is full.(not
applicable to voice
only configuration)
Too many files
stored on the
wearable terminal
.
Delete unused memos and records. You can save these records
on the host computer.
Too many
applications
installed on the
wearable terminal
.
If you have installed additional applications on the
wearable
terminal
, remove them to recover memory.
Select Start > Settings > Control Panel > Remove Programs
icon.
Select the unused program and select Remove.
The
wearable
terminal
does not
accept scan input.
Scanning
application is not
loaded.
Verify that the unit is loaded with a scanning application. See the
System Administrator.
Unreadable bar
code.
Ensure the symbol is not defaced.
Distance between
exit window and bar
code is incorrect.
Ensure
wearable terminal
is within proper scanning range.
Wearable terminal
is not programmed
for the bar code.
Ensure the
wearable terminal
is programmed to accept the type
of bar code being scanned.
Wearable terminal
is not programmed
to generate a beep.
If a beep on a good decode is expected and a beep is not heard,
check that the application is set to generate a beep on good
decode.
Battery is low. If the scanner stops emitting a laser beam when the trigger is
pressed, check the battery level. When the battery is low, the
scanner shuts off before the
wearable terminal
low battery
condition notification.
Note: If the scanner is still not reading symbols, contact the
distributor or Motorola.
Wearable terminal
goes into IPL mode
after cold boot.
P1 or P2 key is held
down during a cold
boot.
Do not press the P1 or P2 key during a cold boot.
All three LEDs are lit
solid.
Voice Only
WT41N0 is in IPL
mode.
Perform cold boot. See
Resetting the Wearable Terminal on
page 2-19
.
Wearable terminal
cannot find any
Bluetooth devices
nearby.
Too far from other
Bluetooth devices.
Move closer to the other Bluetooth device(s), within a range of
10 meters (32 feet).
The Bluetooth
device(s) nearby
are not turned on.
Turn on the Bluetooth device(s) to find.
The Bluetooth
device(s) are not in
discoverable mode.
Set the Bluetooth device(s) to discoverable mode. If needed,
refer to the device’s user documentation for help.
Table 6-1
Troubleshooting the Wearable Terminal (Continued)
Problem Cause Solution
Vista de pagina 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 117 118

Comentarios a estos manuales

Sin comentarios