Motorola Canopy Backhaul Module Guía de usuario Pagina 137

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 425
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 136
Building Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 137 of 425
Canopy System User Guide
Use dielectric grease on all connectors to resist corrosion.
Use only shielded connectors to resist interference and corrosion.
16.2.9 Recommended Tools for Wiring Connectors
The following tools may be needed for cabling the AP:
RJ-11 crimping tool
RJ-45 crimping tool
electrician scissors
wire cutters
cable testing device.
16.2.10 Wiring Connectors
The following diagrams correlate pins to wire colors and illustrate crossovers where
applicable.
Location of Pin 1
Pin 1, relative to the lock tab on the connector of a straight-through cable is located as
shown below.
Lock tab underneath
Pin 1
RJ-45 Pinout for Straight-through Ethernet Cable
Pin 1 white / orange Pin 1
Pin 2 orange Pin 2
Pin 3 white / green Pin 3
Pin 4 blue Pin 4
Pin 5 white / blue Pin 5
Pin 6 green Pin 6
Pin 7 white / brown Pin 7
Pin 8 brown Pin 8
Pins 7 and 8 carry power to the
modules.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
TX+
TX-
RX+
RX-
TX-
TX-
RX+
RX-
+V return
+V
Pin PinRJ-45 Straight-thru
+V return
+V
Vista de pagina 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 424 425

Comentarios a estos manuales

Sin comentarios